Introduction
If you’re seeing white crust on fixtures, soap that just won’t lather, or water heating bills creeping upward, hardness is quietly taxing your home every single day. In homes with mid-to-high hardness, scale behaves like insulation on your heating elements, robbing you of efficiency the very moment it starts forming. Over a few short years, those deposits choke showerheads, stress valves, and leave a dull haze on everything water touches. The costs aren’t just visible; they show up in energy bills, shortened appliance life, and a growing shelf of cleaning products that barely keep up.
Meet the Basu family. Rina Basu (38), a NICU nurse, and her husband Mateo (40), an HVAC technician, live in Round Rock, Texas with their two children, Priya (9) and Kiran (6). Their municipal water tests at 14 GPG hardness with 0.6 ppm chlorine and high TDS. Over the last year alone, the Basus tracked $940 in extra spending—extra detergents, a pair of prematurely replaced showerheads, and a tank water heater flush that still left their showers with reduced flow. After an experiment with an electronic descaler that didn’t move the needle, they were done improvising.
This is exactly where the SoftPro Elite shines. Built by my family at Quality Water Treatment to deliver true soft water without the fluff, SoftPro Elite uses high-efficiency upflow design, precise metering, and durable media to beat hard water where it lives—inside your pipes and appliances—while also helping you discharge less salt and chloride to the environment.
In this guide, I’m laying out ten critical, field-tested insights. You’ll learn:
- Why upflow cleaning changes the math on salt use and discharge How metering stops needless cycles and trims water waste What grain size is right for your home and local hardness Chloride reduction tips I teach professional installers Flow rate and pressure realities during peak demand How SoftPro compares to common brands you’ll encounter Smart features that simplify ownership Warranty and support that genuinely protect your investment
Let’s get your home back to smooth showers, efficient heating, and glassware that actually looks clean—without pumping excess chloride down the drain.
#1. SoftPro Elite Upflow Power – Real Salt Efficiency with Upflow Regeneration, Ion Exchange Resin, and Brine Tank Design
Upflow matters because it fixes the single biggest waste point in softeners: inefficient resin cleaning that burns through salt and water.
- In an upflow cycle, the brine flows upward through the ion exchange resin, expanding the bed and maximizing contact time. This is the opposite of outdated downflow designs that push brine the same direction as service flow, channeling through ruts and leaving pockets of exhausted resin. With SoftPro Elite’s upflow path, I routinely see homeowners use a fraction of the salt they used before. Compared to old-school systems that use 6–15 lbs per cycle, SoftPro Elite often cleans the bed thoroughly with about 2–4 lbs per cycle, translating to big reductions in both salt purchases and chloride discharge. And with an oversized brine tank, refills stretch further—fewer hauls of pellets, fewer chances for bridging, and steadier performance.
Rina and Mateo Basu shifted from weekly salt checks to biweekly glances. Within a month, Priya’s shampoo started rinsing out fully, and their tank-type water heater recovered noticeably quicker after back-to-back showers.
How Upflow Regeneration Cuts Salt and Water Waste
Upflow regeneration expands the resin bed by roughly 50–70%, breaking up compaction and exposing more exchange sites. That expansion lets the brine spend longer with the resin surface area, so you get close to full brine utilization—often north of 90%. The result is high recovery with lower brine volume. Water used in the cycle also drops; where downflow can waste 50–80 gallons per cleaning, upflow commonly needs around 18–30 gallons. Over a year, that’s hundreds of gallons not sent down your drain line and dozens of pounds of best softener water salt you don’t have to purchase or discharge.
The Chemistry That Actually Softens Water
Hard water is driven by divalent ions—mainly calcium and magnesium. During service, the cation exchange media trades sodium for those hardness ions. When sites are mostly full (around 85% of the available sites are occupied), the resin is “exhausted.” Upflow brine flow dislodges those trapped ions more completely than downflow, so the resin bed returns to near-full strength. With 8% crosslink resin, you get the sweet spot between capacity and longevity, ensuring the media lasts well north of a decade with normal municipal chlorine levels.
Fewer Refills, Fewer Bridging Headaches
The brine tank’s capacity matters for consistency. A larger volume gives pellets room to dissolve evenly without building a hard crust. Keep a steady 3–6 inches of salt above the water line, and bridging virtually disappears. The Basus went from chipping at salt clumps every six weeks to quickly topping up clean pellets every other month.
Key Takeaway
Upflow’s expanded contact time and thorough bed cleaning are the backbone of real salt and water savings—your wallet and local watershed both benefit.
#2. Metered Demand Control – Demand-Initiated Regeneration, Smart Valve Controller, and Vacation Mode
Hard water usage isn’t uniform. Metering stops your softener from guessing—and flushing salt and water down the drain on the wrong day.
- SoftPro Elite’s demand-initiated regeneration uses a turbine meter to measure every gallon. It regenerates only when actual usage and hardness require it. The smart valve controller with a 4-line LCD touchpad displays gallons remaining, days since last regeneration, and diagnostics for fast troubleshooting. Heading out of town? Vacation mode refreshes the system every seven days to keep the resin healthy without full cycles.
For the Basus, weekends meant heavier showers, laundry, and the dishwasher. On weekdays, usage dropped. Their Elite adapted in real time, trimming unnecessary cycles and the associated salt and water.
Why Demand Control Outperforms Time Clocks
Timer-based units run on a schedule whether you need soft water or not. If your Sunday is heavy use and Monday is light, a timer can misfire—either regenerating too late (hard water breakthrough) or too early (wasting salt). A metered valve matches cycles to your actual habits, reducing both regeneration frequency and chloride discharge. It’s accurate and forgiving when your schedule changes.
Diagnostics You Can Read at a Glance
The SoftPro Elite digital control head shows gallons left before capacity is reached, so you’re not guessing when the next clean will happen. Error codes isolate issues (for example, a drain obstruction) and the manual regeneration button lets you force a cycle if you expect company. The self-charging capacitor holds settings through 48-hour power blips—critical during storm season.
Vacation Mode = Resin Care, Not Waste
Extended inactivity invites biofilm. Vacation mode runs a preventive refresh rather than a full brine cycle, using just enough water to keep the system sanitary. It’s minimal impact with maximum benefit.
Key Takeaway
Metering aligns your softener to your life, cutting out pointless cycles and keeping chloride output in check.
#3. Side-by-Side Reality Check – SoftPro Elite vs Fleck 5600SXT and SpringWell SS1 (Upflow, Capacity Control, and Ownership Experience)
You’ll encounter alternatives. Here’s how two common picks compare in the field.
- Technical performance: The Fleck 5600SXT typically relies on downflow regeneration. Downflow tends to push brine through established channels, leaving sections of resin less cleaned and requiring higher salt doses per cycle. The SpringWell SS1 markets efficiency, but it maintains a larger safety buffer, effectively committing more salt in reserve. SoftPro Elite’s upflow approach maximizes brine contact and uses a lean reserve model to reduce salt consumption without risking hard water bleed-through. Real-world use: For DIYers, SoftPro’s quick-connects, straightforward programming, and family-led support simplify setup. The Fleck head is robust, but less intuitive to program for non-pros, and downflow will regenerate more often with higher salt demand. SpringWell’s platform performs, but its average reserve strategy means more salt year over year—especially noticeable in households like the Basus, where usage fluctuates between weekday lows and weekend peaks. Value perspective: Factor in lower salt buys, lower water waste, and fewer service calls. Over 5–10 years, SoftPro’s efficiency and direct support make it worth every single penny.
What That Means for the Basus
Rina and Mateo needed a system that matched their variable routine without babysitting. After moving from an electronic descaler to SoftPro Elite, they saw smoother lather, less haze on fixtures, and fewer salt runs. The difference was immediate and sustained.
Key Takeaway
When you add up salt, water, and simplicity, SoftPro Elite’s upflow and smart controls win where it counts—ongoing cost and ownership ease.
#4. Built for Throughput – 15 GPM Flow Rate, Peak Demand, and Pressure Stability
A softener must keep up with your home’s rhythm. Morning showers, the dishwasher mid-cycle, and a hose filling outside—peak use can reveal flow limitations fast.
- SoftPro Elite is rated at a 15 GPM service flow, with peaks to 18 GPM in typical residential connections. Pressure drop across the valve remains minimal—commonly in the 3–5 PSI range—so shower performance doesn’t collapse when several fixtures run at once. Minimum inlet pressure is 25 PSI; if you’re above 80 PSI, a regulator is recommended to protect plumbing and appliances. Standard 3/4" or 1" connections ensure compatibility with most residential main lines.
Mateo noticed the difference on a Saturday: dishwasher running, both kids showering, washing machine filling—and no more dribble at the kitchen faucet.
Peak-Demand Planning
Two showers, a sink, and a laundry cycle can push households past 12 GPM. Many budget softeners choke on that. With SoftPro Elite’s design and proper sizing, pressure remains comfortable during those critical minutes. If your home has larger plumbing or more than 3.5 baths, sizing up one capacity tier maintains a wider comfort margin.
Why Pressure Stability Protects Appliances
Appliances designed to operate within a certain pressure band run longer and fail less often when flow is consistent. Maintaining a controlled pressure drop across the softener reduces stress on valves and solenoids in dishwashers and washers—extending their service life.
What the Basus Experienced
Before SoftPro Elite, back-to-back showers left the second bather complaining about temperature swings and weak spray. With the Elite maintaining throughput, shower quality held steady—even with laundry going.
Key Takeaway
Flow performance isn’t a luxury; it’s an everyday requirement. SoftPro Elite sustains the water feel you expect without starving fixtures.
#5. Smarter Capacity Matching – Grain Capacity Options, GPG, and Regeneration Frequency
Right-sizing your softener is the easiest way to reduce salt use and chloride discharge while ensuring consistent soft water.
- SoftPro Elite offers 32K, 48K, 64K, 80K, and 110K grain capacity systems. The right fit depends on people, usage, and measured hardness. A simple rule of thumb: People × 75 gallons × your GPG hardness = daily grains removed. Aim for regeneration every 3–7 days; too frequent wastes salt, too rare lets the resin sit dirty for long stretches.
For the Basus: 4 people × 75 × 14 GPG = 4,200 grains/day. A 48K generally fits, but their weekend surges and dishwasher habits made a 64K the better call—keeping cycles to 4–6 days and preserving flow on busy mornings.
Why 48K vs 64K Might Change Your Costs
At 14 GPG, a 48K system may run closer to the frequent side if weekend loads spike. Jumping to 64K doesn’t just add capacity; it helps keep you in that 3–7 day sweet spot with less total salt used per 1,000 grains removed. You’ll also experience fewer regeneration events per month—lowering water waste and chloride discharge.
Hardness Isn’t the Only Variable
Iron up to 3 ppm, chlorine levels, and family growth all modify the equation. Iron steals capacity, so if you have clear-water iron, consider the next size up or add an iron filter when levels rise. Municipal chlorine also ticks down resin life over time; SoftPro’s 8% resin is resilient, but severe chlorine exposure may justify pre-carbon filtration in some cities.
Practical Sizing with Room to Grow
I always allow a small buffer for life changes—houseguests, a new bathroom, or the kids deciding daily showers are essential. That breathing room ensures your softener remains efficient and comfortable.
Key Takeaway
The right capacity reduces cycles, salt, and stress—choose once, enjoy daily.
#6. Chloride Reduction Playbook – Settings, Salt Selection, and Discharge Best Practices
Softeners don’t have to be heavy chloride dischargers. Precision setup and maintenance make a genuine difference.
- Program accurate hardness. Don’t guess—test. Overstating hardness forces more frequent cycles and higher brine volumes. Use efficient brine settings. With upflow, you can often target 4,000–5,000 grains removed per pound of salt. Over-salting a cycle doesn’t add value; it simply increases discharge. Choose cleaner salt. High-purity solar pellets or evaporated salt (99.6–99.99%) dissolve more completely, lowering insoluble residue and keeping the brine system functioning at peak effectiveness.
Rina and Mateo switched to high-purity pellets and dialed hardness to the measured 14 GPG. The change cut their regeneration water use and salt trickle—tangible wins both financially and environmentally.
Advanced Setting Tips to Lower Discharge
- Start with the true hardness number and add 1–2 GPG if you have 1–2 ppm iron. No iron? Don’t inflate. Use the lean, upflow-optimized brine fill settings recommended by our team. Avoid “high salt” defaults common on old-school units. Monitor gallons-per-regeneration for two weeks, then trim settings gently if your usage pattern supports it.
Salt Storage and Handling
Moisture is the enemy. Keep your bags dry, avoid storing salt near damp floors, and maintain that 3–6" above the water line. Good handling equals reliable dissolving equals lower discharge.
Drain and Plumbing Considerations
Use the shortest, most direct drain run with proper air gap. A restricted drain line forces longer backwash times. Check the line quarterly; a clear path supports quick, efficient cycling with less water.
Key Takeaway
Your softener’s environmental footprint is adjustable—smart settings, clean salt, and simple housekeeping reduce chloride output meaningfully.
#7. Hands-On Reliability – Fine Mesh Resin, 8% Crosslink Resin, and System Diagnostics
Long-term performance depends on media quality and the ability to interpret what your softener is telling you.
- Fine mesh resin increases active surface area, improving capture of hardness ions and helping with clear-water iron up to 3 ppm. 8% crosslink resin balances capacity and chlorine resistance, with a 15–20 year expected lifespan under normal municipal conditions. System diagnostics empower owners to spot small issues early—like a partial drain restriction—before performance drops.
For the Basus, seeing “gallons remaining” on-screen gave them confidence that their weekend usage wouldn’t catch the system off guard. When Priya hosted a sleepover, a quick glance told Rina a manual regen made sense. No guesswork.
Why Media Quality Matters
Inferior resin beads fracture and foul, losing capacity and leaking hardness. With fine mesh and quality crosslinking, the bed stays intact, backwashes cleaner, and recovers quickly—fewer cycles, less salt, better water. When paired with upflow, you’re getting near-ideal utilization of each brine draw.
Reading Diagnostics Like a Pro
- If hardness creeps past 1 GPG at a faucet, check brine level, injector cleanliness, and confirm programming. If regeneration seems frequent, verify the household size setting and actual hardness versus the programmed number. Keep an eye on error codes; they’re more than letters. They point exactly where to look, which is why our phone support can resolve most issues in minutes.
Preventive Maintenance Pays
A quarterly injector screen rinse, annual resin sanitization, and drain line inspection are simple tasks that keep performance steady and discharge low.
Key Takeaway
Premium media and readable diagnostics equal efficient softening now—and for the next two decades.
#8. Independent by Design – SoftPro vs Culligan (Ownership Control, Service Access, and True Lifetime Support)
Some systems tie you to dealer networks; SoftPro keeps you in control.
- Technical difference: Culligan builds capable softeners, but they’re typically paired with dealer-exclusive parts and service. SoftPro Elite uses standard industry components and openly available parts, with a transparent, owner-friendly Quality Water Treatment ecosystem. That means you can install, adjust, and maintain your system without mandatory service contracts. Application difference: For DIY-minded households like the Basus, SoftPro’s quick-connect fittings, programming guide, and real human support add up to real independence. Heather’s installation videos walk you through the details, and our support line helps fine-tune brine settings to reduce chloride discharge—no truck roll required. Value perspective: Over a 5–10 year window, avoiding dealer markups on routine service and retaining control of your own system’s settings often saves four figures. Pair that with lifetime coverage on tanks and valve, and you’ll find SoftPro is worth every single penny.
What That Means on Weekends and Holidays
When your softener needs attention Saturday morning, you shouldn’t have to wait for “business hours.” With SoftPro, you have the documentation, parts access, and support that let you act on your schedule—keeping your water soft and your discharge minimal.
Key Takeaway
Choose a system you truly own. It’s better for your budget, your stress level, and your results.
#9. Compliance, Safety, and Trust – NSF 372, IAPMO, and Family-Backed Warranties
Certifications and warranties say a lot about a product’s design and the people behind it.
- SoftPro Elite is certified NSF 372 for lead-free design with IAPMO materials safety validation. Lifetime warranty on the control valve and mineral tank protects your core investment; electronics are covered for 10 years, and resin life is expected at 15–20 years with normal municipal chlorine levels. Most importantly, you’re backed by a family that’s been at this since 1990. You’ll talk to Jeremy for sizing help, Heather for parts and how-to, and me when edge cases arise.
The Basus valued knowing that if a storm knocked out power, the self-charging capacitor held their settings—and if something ever failed, they had one call to make, not a corporate phone tree.
Why Third-Party Validation Matters
Independent verification protects you from inflated claims. NSF 372 ensures lead-free pathways. Material safety certifications confirm the components interacting with your water meet strict standards. These aren’t marketing flourishes; they’re proof points.
Warranty Nuances You Should Know
Some brands advertise “lifetime,” but exclude common failure points or require dealer-only service to maintain coverage. Our lifetime warranty is direct with us—no third-party administrator. If you sell your house, it’s transferable, which actually adds value to your property.
Key Takeaway
Safety certifications and a real warranty are your insurance policy. With SoftPro, both are robust and human-backed.
#10. Installation Without Drama – Point-of-Entry Setup, Bypass Valve, and Practical Space Planning
Getting your softener in place shouldn’t become a project you regret starting.
- The SoftPro Elite arrives with a full-port bypass valve and quick-connect options that simplify tie-in. Standard electrical (110V GFCI) and common drain requirements keep surprises to a minimum. Plan roughly an 18" x 24" footprint for a 48K–64K system, with 60–72" height clearance for salt loading and service. Keep the drain within 20 feet for gravity flow; further runs may need a condensate pump.
Mateo, an HVAC pro, installed their Elite in a single afternoon. The longest step wasn’t plumbing—it was watching the resin prime during the initial cycle.
Pre-Install Checklist
- Confirm hardness with a test kit or lab report. Verify pipe size and static pressure; add a regulator if you’re over 80 PSI. Choose a location near the main, an outlet, and a drain with an air gap. Check local code for backflow or permit requirements.
Basic Connection Steps
Shut down and drain house pressure. Cut into the main and connect the bypass. Plumb the valve inlet/outlet correctly (they’re labeled). Run the drain line with the proper fall and air gap. Connect brine line to the brine tank safety float. Add 40–80 lbs of salt. Program hardness, time, and household size. Initiate a manual cycle to prime, then test for leaks.When to Call a Pro
If you’re sweating copper and don’t have the tools—or local code is strict—hire a plumber. It’s typically a few hundred dollars and worth the neat, code-compliant result.
Key Takeaway
A well-planned install pays off every day thereafter. And if you get stuck, Heather’s team will get you unstuck.
FAQ: Expert Answers to the Most Common SoftPro Elite Questions
1) How does SoftPro Elite’s upflow regeneration reduce salt use compared to downflow?
Upflow pushes brine upward through the resin, expanding the bed for maximum contact. That improved contact delivers near-complete regeneration with less brine volume per cycle. In practice, households commonly see 2–4 lbs of salt per regeneration rather than the 6–15 lbs standard downflow units require. With fewer gallons used per cleaning (often 18–30 vs 50–80), you’re cutting both salt purchases and chloride discharge. The Basus measured fewer salt bags used over their first 60 days than any prior period—a clear indicator the upflow cleaning is doing more with less. My recommendation: verify your hardness, use high-purity pellets, and keep the brine settings lean to capture the full upflow benefit.
2) What grain capacity do I need for a family of four at 18 GPG?
Multiply people × 75 gallons × GPG: 4 × 75 × 18 = 5,400 grains/day. Target 3–7 days between regens: 5,400 × 5 = 27,000 grains per cycle is your baseline. A 48K can work, but a 64K gives better buffer for peak-demand days and stretches cycles toward the efficient mid-range. Expect salt savings with upflow and fewer regeneration events per month. If you encounter 1–2 ppm iron, consider either sizing up or adding iron pre-treatment. As always, Jeremy can confirm sizing based on your exact habits.
3) Can SoftPro Elite handle iron along with hardness?
Yes—up to 3 ppm of clear-water iron. The combination of fine mesh resin and upflow cleaning knocks iron loose effectively during regeneration. If your iron exceeds 3 ppm, I advise a dedicated iron filter before the softener. The Basus’ water had minimal iron, but customers on private wells often benefit from a pre-iron unit to protect resin life and maintain peak salt efficiency. Keep in mind: iron counts as a load on capacity, so program settings accordingly.
4) Can I install SoftPro Elite myself, or do I need a plumber?
Many owners DIY the install thanks to the pre-assembled bypass valve, straightforward drain requirements, and our programming guide. If you’re comfortable cutting into the main line and making clean connections (copper, PEX, or CPVC), you can likely handle it in a day. Ensure an air-gapped drain, a nearby 110V outlet, and allow space for salt refills. If local code requires a permit or you’d rather not sweat copper, hire a plumber. Either way, Heather’s team supports you with videos and phone help. The Basus handled their install in an afternoon using quick-connect fittings.
5) How much space should I plan for a 64K system?
Plan approximately 18" x 24" of floor area and 60–72" in height for service access. Keep the brine tank accessible for salt loading and maintenance. The drain should be within 20 feet for gravity flow; a longer run may need a small pump. Maintain a few inches behind the unit for hose and line routing. Good planning ensures a neater, code-compliant installation and easier lifetime service.
6) How often will I need to add salt?
That depends on hardness, people, and usage swings. With upflow and lean brine settings, many families add 40–80 lbs every 4–8 weeks. The smart valve controller helps you track real usage; watch the “gallons remaining” and “days since regeneration” to anticipate refills. The Basus, with 14 GPG and four people, top up about every six weeks. Use high-purity pellets to minimize residue and keep the brine system efficient.
7) What’s the lifespan of the resin?
SoftPro Elite uses 8% crosslink resin, which typically lasts 15–20 years on city water with best water softener system reviews moderate chlorine. Fine mesh options boost capture efficiency and pair well with upflow for long-term performance. Excess chlorine or heavy iron can shorten resin life; if your municipality runs high chlorine, consider a pre-carbon filter. Annual sanitization and quarterly injector cleaning further extend resin life.
8) What’s my 10-year total cost of ownership?
Expect the system to run $1,200–$2,800 depending on capacity, plus $0–$600 for installation (DIY vs pro). Annual salt commonly lands at $60–$120 with upflow versus $180–$400 for typical downflow units. Annual water waste is also lower—around $25–$40 in many markets. Over a decade, SoftPro’s upflow design typically saves $1,200–$2,500 compared to conventional systems. Add in avoided appliance damage and improved heater efficiency, and the ROI tightens further. The Basus estimate they’ll recoup their investment within three years.
9) How much will I save on salt each year?
Savings vary, but in upflow systems programmed precisely for your hardness, owners often see two-thirds less salt consumption than with downflow designs. At current salt prices, that can translate to $100–$250 annually for mid-size homes. Your true number depends on regeneration frequency, capacity, and how closely your programming matches water quality. Track “bags per month” for 90 days—you’ll see the difference in real terms.
10) How does SoftPro Elite compare to Fleck 5600SXT?
Fleck’s 5600SXT is a durable platform, but it typically uses downflow regeneration, which equates to higher salt dosing and more water per cleaning. SoftPro Elite’s upflow approach and lean reserve strategy reduce cycle count and per-cycle salt use. For the Basus, who swing from weekday low use to weekend peaks, SoftPro’s metering and diagnostics delivered fewer, smarter cycles. Installation and programming are also straightforward for first-time owners. Over time, those differences add up financially. My advice: if efficiency and owner control matter, SoftPro Elite is the better long-term partner.
11) Is SoftPro Elite a better choice than Culligan systems?
Culligan builds quality equipment, but service and parts are commonly dealer-dependent, which can lock you into higher costs and less control over settings. SoftPro Elite uses standard parts, is fully owner-serviceable, and backed directly by our family-run team. For households focused on minimizing chloride discharge, owning your settings and being able to adjust brine parameters without calling a dealer is a major advantage. From install to tuning, you stay in the driver’s seat.
12) Will SoftPro Elite work with extremely hard water (25+ GPG)?
Absolutely—choose the right capacity. For 25+ GPG, a 64K, 80K, or even 110K may be appropriate depending on family size and fixtures. Upflow cleaning shines at higher hardness because you’re squeezing more performance out of each pound of salt. If iron is also elevated, add pre-treatment. We’ll help you calculate daily load and size for 3–7 day cycles to keep salt use reasonable and discharge balanced.
Conclusion
Hard water doesn’t just create cleaning headaches—it quietly drains energy, shortens appliance life, and inflates monthly costs. The SoftPro Elite solves that with a smarter process: upflow cleaning that extracts more performance from less salt, metering that regenerates on your schedule, high-quality media that lasts, and diagnostics designed for real people.
For the Basu family, the change was immediate: silkier showers, better rinsing, no more Saturday faucet complaints, and far fewer salt runs. For you, it can be the end of chronic buildup and the start of predictable ownership—with real support and an industry-leading warranty to back it up.
When you want truly soft water with a simpler, lower-chloride footprint, the SoftPro Elite isn’t just a good choice—it’s the benchmark. Reach out to Jeremy for sizing, lean on Heather for installation confidence, and consider this your last softener purchase for a very long time.